INTUITIVE
& EASY TO USE.
NO
PROGRAMMING EXPERIENCE REQUIRED
COMMAND SET PROVIDED
ENABLES
CUSTOMIZATION OF APPLICATION
PARAMETER RETENTION - NON-VOLATILE
MEMORY
HiTECH
model TC-136 is a
bi-directional control for use with independent QualityTEC®
Thermoelectric Modules
or in conjunction with
auxiliary or supplemental resistive heaters for both cooling and heating
applications.
The
“H” bridge configuration of the solid state output device allows for
bi-directional current flow in the QualityTEC® Thermoelectric Modules.
The
HiTECH
model TC-136 controller has
an RS485 communication port for direct interface with a compatible PC.
The RS-485 interface has 1500 VAC isolation from all other electronic
circuitry. The controller can be configured in a variety of operating
modes, parameters can be field selected, and/or data acquisition can be
performed, all using the communications interface.
The unit will accept up to 32 addressable interfaces, over (up to)
4,000 feet of cable.
After
set-up, the PC can be disconnected and the HiTECH
model TC-136 becomes
an unique, stand alone controller. All
settings are retained in non-volatile memory.
The
intuitive, user friendly, communications software requires no prior
programming experience. In addition, the
command set is provided to enable programming of the software for use
as an embedded control.
Mechanically,
the printed circuit board is mounted to a metal bracket, suitable for
either horizontal or vertical
orientation. Input and output
connections are accessible via screw type terminal strips, fast-on-terminals
and a 0.1 center connector.
To view or download
additional information in PDF format, right
click appropriate button
Blue
Button - Specification Sheet
Green
Button - Instruction Manual
HiTECH
Technologies, Inc.
301 Oxford Valley
Road - Yardley, PA 19067-7706
Phone:
1-800-755-4507
or 1-215-321-6012
tec@hitechtec.com
